Adjust the temperature to 280 degrees to enter the working state, the air pressure is between 0.2-0.3MPa, the thinnest spliced wood is 0.4mm thick, the thickest wood can be spliced to 3mm thick, and small pieces of wood can reach 4mm thick. With automatic heat preservation function, the glue line is continuously threaded in the heater wire pipe, and the splicing nozzle is not blocked.

Splice 0.4-2mm thin wood veneers, use hot-melted strands as the bonding material, and stick a "Z-shaped" or "wave-shaped" route on the opposite surface of the wood chip to firmly bond the two wood chips together. , The splicing speed is fast, the efficiency is high, the bonding quality is good, and the labor intensity of the workers can be reduced at the same time.