ML1560B

Automatic comb tenon production line

Schematic diagram

product description:

(Note: The comb tenon blade is optional)Finger joint shaper blade is optional accessory.

AUTOMATIC FINGER JOINTING LINE

Comb tenon mortise, stitching is an effective method of horizontal inoculation of timber, it can improve the utilization of timber, reduce waste of resources, realize short material with long, bad material, the purpose of optimal use by tenon joining together of plank, small deformation in the later processing, performance is superior to the ordinary wood, the products are widely used in furniture, doors and Windows, wooden production processing industry, etc.

WDL' s AUTOMATIC FINGER JOINTING LINE adopted the septum pneumatic valve of Bosch Rexroth, imported from Germany, can be made each action fast and stable;

The transducer system of Lenze, imported from Germany, which meets the requirement of shaping speed and stable passing.

The inported dual-linear guides and sliding seat adjust the saw spindles and workbenches movement;

The safety guards separate human and working area. All doors and circuit and connected. Once open a door, related working area will be stopped running.

Partial product introduction:

The air pressure sensor can be prevented the machine from combing when the air pressure is below the safe standard and the check valve can maintain the safe air pressure throughout the process, and the trip sensor ensures that the processing object are combed in the impacted state.

Equipped with the organized and compact knife-shaft drive. All the knife-shaft are drived by the leather belt, so as to libration when operating. After the adjustment of the tool position, the leather belt has the automatic tension function.

The laser-targeted irradiation technology enables the alignment check of the face and height of the wood. The tooth hardwood installed on the back board can effectively avoid the avulsion and collapse of the last wood.

Equipped with the up and down scoring saw blades and the spiral smashing saws of Germany, all the tooth styles can be processed perfectly through the transformation of the knives, no matter the positive/negative joint, or exchange-shoulder joint.

All horizontal displacements of spindles are micro-regulated by the differential screws. Equipped with perfectly precise detectors to make the precision reach 0.01mm.

The pneumatic spraying device can respond quickly to the start-stop mark; repeatedly pressing the manual button of spraying can clean the spraying system easily. Different sizes of the nozzle are adopted according to the different viscosity of the glue, and the quantity of nozzle is in accordance with the cross-section's height of the wood. Only one piece of glue film is covered on the tool, compared with the traditional coating system, can save 30% of the glue.

The unique small secund plate device enables the end of the short wood can be delivered normally into the vertical position after cutting. The special large oil tanks can push the pressure from the push-oriented set (reach 12 tons of the pressure) to ensure the reliability of the vertical joint.

The length block device of vertical joint can quickly adjust when the length of the jointing wood is with 6m-3m. To the change the block size to suit different sizes cross-section of wood.